ISI Certification
Introduction
The ISI mark is by far the most recognized product quality certification mark in the Indian subcontinent. The ISI mark is issued by Bureau of Indian Standards (BIS). There are 150 mandatory products which need ISI certification before being sold in India.
Mandatory Product List
List of Products which require ISI Certification as Mandatory are as follows:
| Sr No. | IS No. | Product | For Notification Details Please click on the given link |
|---|---|---|---|
Cement (any variety of cement manufactured or sold in India) such as | |||
1. | IS 12330 | Sulphate Resisting Portland Cement | 1. Cement (Quality Control)Order, 2003 |
2. | IS 12600 | Low heat Portland Cement | |
3. | IS 1489 (Part 1) | Portland Pozzolana Cement-Part1 Fly-ash based | |
4. | IS 1489 (Part 2) | Portland Pozzolana Cement-Part 2 Calcined clay based | |
5. | IS 269 | Ordinary Portland Cement | |
6. | IS 3466 | Masonry Cement | |
7. | IS 455 | Portland Slag Cement | |
8. | IS 6452 | High Alumina Cement for Structural use | |
9. | IS 6909 | Super sulphated cement | |
10. | IS 8041 | Rapid hardening Portland cement | |
11. | IS 8042 | White Portland Cement | |
12. | IS 8043 | Hydrophobic Portland Cement | |
13. | IS 8229 | Oil well Cement | |
14. | IS 16415: 2015 | Composite Cement- Specification. | |
15. | IS 16993: 2018 | Microfine Ordinary Portland Cement- Specification. | |
16. | IS 15895: 2018 | High Alumina Refractory Cement. | |
Household Electrical goods | |||
17. | IS 12640 (Part 1) | Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) | 2. Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003 Subsequent Amendments: S.O. 165(E) dated 5 Feb 2004 , S.O. 1172 (E) dated 22Aug 2005 , S.O. 512(E) dated 19 Feb 2009 , |
18. | IS 12640 (Part 2) | Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs) | |
19. | IS 13010 | AC watt-hour meters, class 0.5, 1 & 2 | |
20. | IS 13779 | AC static watt-hour meters, class 1 & 2 | |
21. | IS 14697 | AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S | |
22. | IS 15111 (Part 1 & 2) | Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements | |
23. | IS 302 (Part 2/Sec 3) | Safety of household and similar electrical appliances – Electric iron | |
24. | IS 302 (Part 2/Sec 201) | Safety of household and similar electrical appliances– Electric immersion water-heaters | |
25. | IS 302 (Part 2/Sec 202) | Safety of household and similar electrical appliances –Electric stoves | |
26. | IS 302 (Part 2/Sec 30) | Safety of household and similar electrical appliances-Room heaters | |
27. | IS 3854 | Switches for domestic and similar purposes | |
28. | IS 418 | Tungsten filament general service electric lamps (upto100 W ) | |
29. | IS 694 | PVC insulated cables for working voltages up to and including 1100V | |
30. | IS 8828 * | Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations | |
31. | IS 9968 (Part 1) | Elastomer insulated cables (Part.1): For working voltages up to and including1100 V | |
* Since revised as IS/IEC 60898 | |||
Batteries | |||
32 | IS 8144 | Multi-Purpose dry batteries | 3. SO 516(E), dated 25th May 1987 |
Food & Related Products | |||
33. | IS 15757 | Follow–up formula –complimentary foods | Food Safety & Standards Prohibition & Restriction on Sales, Regulation, 2011 4. GSR 759(E) and GSR 760(E) |
34. | IS 11536 | Processed cereal based complementary foods | |
35. | IS 1165 | Milk-powder | |
36. | IS 1166 | Condensed milk, partly skimmed and skimmed condensed milk | |
37. | IS 12176 | Sweetened ultra high temperature treated condensed milk | |
38. | IS 13334 (Part 1) | Skimmed milk-powder, standard grade | Food Safety & Standards |
39. | IS 13334 (Part 2) | Skimmed milk-powder, extra grade | Prohibition & Restriction on Sales, Regulation, 2011 GSR 759(E) and GSR 760(E) |
40. | IS 13428 | Packaged Natural Mineral Water | |
41. | IS 14433 | Infant milk substitutes | |
42. | IS 14542 | Partly skimmed milk powder | |
43. | IS 14543 | Packaged Drinking Water (Other than Packaged Natural Mineral Water) | |
44. | IS 1656 | Milk-cereal based weaning foods | |
45. | IS 3470 | Hexane, Food grade | 5. Solvent Extracted Oil, De-oiled Meals and Edible Flour (Control) Order, 1967 |
46. | IS 14625 | Plastic Feeding Bottles | |
47. | IS 5168 | Glass Feeding Bottles | |
Oil Pressure Stoves | |||
48. | IS 10109 | Oil pressure stove, offset burner type | 7. Oil Pressure Stoves (Q.C) Order, 1997 |
49. | IS 2787 | Multi-burner oil pressure stoves | |
50. | IS 1342 | Oil pressure stoves | |
Automobile Accessories | |||
51. | IS 13098 | Automotive vehicles –Tubes for pneumatic tyres | 8. Pneumatic Tyres and Tubes for Automotive Vehicles (Quality Control) Order, 2009 S.O. No. 2953(E) dated 19-11-2009 Subsequent Amendments |
52. | IS 15627 | Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles | |
53. | IS 15633 | Automotive vehicles-Pneumatic tyres for passenger car vehicles– Diagonal and radial ply | |
54. | IS 15636 | Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply | |
Cylinder, Valves and Regulation | |||
55. | IS 14899 | Liquefied petroleum gas containers for automotive use | 9. Explosive Act, 1884 Gas Cylinder Rules, 2016 |
56. | IS 15100 | Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use | |
57. | IS 3196 (Part 4) | Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases | |
58. | IS 3196 (Part 1) | Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) | |
59. | IS 3196 (Part 2) | Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. | |
60. | IS 3224 | Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders | |
61. | IS 3745 | Yoke Type Valve Connection for Small Medical Gas Cylinders | |
62. | IS 7142 | Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity | |
63. | IS 7285 (Part 1) | Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders | |
64. | IS 7285 (Part 2) | Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) | |
65. | IS 7302 | Valve fittings for gas cylinder valves for use with breathing apparatus | |
66. | IS 7312 | Welded and seamless steel dissolved acetylene gas cylinders | |
67. | IS 8737 | Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders | |
68. | IS 8776 | Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity | |
69. | IS 9798 | Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures | |
Medical Equipment | |||
70. | IS 3055 (Part 1) | Clinical thermometers :Part1 Solid stem type | 10. Clinical Thermometers (Quality Control), 2001 |
71. | IS 3055 (Part 2) | Clinical thermometers :Part 2 Enclosed scale type | |
72. | IS 7620 (Part 1) | Diagnostic Medical X-Ray Equipment | 11. Diagnostic Medical X- Ray Equipment |
Steel and Iron Products | |||
73. | IS 1785 (Part 1) : 1983 | Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire | Steel and Steel Products (Quality Control) Order, 2020 S.O. 756(E) , dated 14-02-2020 Superseded by Steel and Steel Products (Quality Control) Order, 2020 S.O. 1673(E), dated 27-05-2020 Superseded by Steel and Steel Products (Quality Control) Order, 2020 (S.O. 2379(E), dated 17-07-2020) 12. Superseded by Steel and Steel Products (Quality Control) Order, 2020 |
74. | IS 1785 (Part 2) : 1983 | Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire | |
75. | IS 6003:2010 | Indented wire for Pre-stressed concrete | |
76. | IS 6006:2014 | Uncoated stress relieved strand for Pre-stressed concrete. | |
77. | IS 13620:1993 | Fusion bonded epoxy coated reinforcing bars | |
78. | IS 14268:1995 | Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete. | |
79. | IS 277:2003 | Galvanized steel sheets ( plain and corrugated). | |
80. | IS 2002:2009 | Steel plates for pressure vessels for intermediate and high temperature service including boilers. | |
81. | IS 2041:2009 | Steel plates for pressure vessels used at moderate and low temperature | |
82. | IS 2830:2012 | Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose | |
83. | IS 1786:2008 | High strength deformed steel bars and wires for concrete reinforcement | |
84. | IS 648:2006 | Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) | |
85. | IS 3024:2015 | Grain oriented electrical steel sheet & strip (CRGO) | |
| 86. | IS 15391:2003 | Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification. | |
87. | IS 2062:2011 | Hot rolled medium and high tensile structural steel | |
88. | IS 432 : Part 1:1982 | Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars | |
89. | IS 432 : Part 2:1982 | Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire | |
90. | IS 513 (Part-1): 2016 | Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose | |
91. | IS 432 : Part 2 : 1982 | Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel | |
92. | IS 1079: 2017 | Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification. | |
93. | IS 1875:1992 | Carbon steel billets, blooms, slabs and bars for forgings. | |
94. | IS 2879:1998 | Mild steel for metal arc welding electrodes. | |
95. | IS 3502:2009 | Steel Chequered Plates | |
96. | IS 5872:1990 | Cold Rolled Steel Strips (Box Strappings). | |
97. | IS 5986: 2017 | Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification. | |
98. | IS 6240:2008 | Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders | |
99. | IS 7283:1992 | Hot Rolled bars for production of bright bars and machined parts for engineering applications. | |
100. | IS 7887:1992 | Mild steel wire rods for general engineering purposes. | |
101. | IS 10748:2004 | Hot Rolled Steel Strip for Welded Tubes and Pipes. | |
102. | IS 11513:2017 | Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification | |
103. | IS 15647:2006 | Hot rolled steel narrow width strip for welded tubes and pipes | |
104. | IS 7904:2017 | High carbon steel wire rods- Specification | |
105. | IS 14246:2013 | Continuously pre-painted galvanized steel sheets and coils | |
106. | IS 15965:2012 | Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain). | |
107. | IS 280: 2006 | Mild steel wire for General Engineering purposes. | |
108. | IS 1835:1976 | Round Steel wire for ropes | |
109. | IS 3975:1999 | Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables | |
110. | IS 4368:1967 | Alloy Steel billets, blooms and slabs for forging for general engineering purposes. | |
111. | IS 4454 (Part 1) : 2001 | Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. | |
112. | IS 4454 (Part 2): 2001 | Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. | |
113. | IS 4824:2006 | Bead Wires for Tyres | |
114. | IS 11169 (Part 1): 1984 | Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels | |
115. | IS 11587:1986 | Structural Weather resistant steel. | |
116. | IS 15103: 2002 | Fire resistant Steel- Specification | |
117. | IS 15914:2011 | High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. | |
118. | IS 15961:2012 | Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) | |
119. | IS 15962:2012 | Structural Steel for Building for Structures with improved seismic Resistance | |
120. | IS 6527:1995 | Stainless Steel wire Rod | |
121. | IS 6528:1995 | Stainless Steel Wires | |
122. | IS 6603:2001 | Stainless Steel Bars and Flats | |
123. | IS 5522:2014 | Stainless Steel sheets and strips for utensils- Specification
| |
124. | IS 6911:2017 | Stainless Steel Plate, Sheet and Strip- Specification | |
125. | IS 15997:2012 | Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification | |
126. | IS 1110 : 1990 | Ferrosilicon – Specification | |
127. | IS 4409 : 1973 | Specification for Ferronickel | |
128. | IS 1029 : 1970 | Specification for Hot rolled steel strip (bailing) | |
129. | IS 2385 : 1977 | Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate | |
130. | IS 3039 : 1988 | Specification for Structural steel for construction of hulls of ships | |
131. | IS 9550 2001 | Bright steel bars – v Specification | |
132. | IS 3748 : 1990 | Tool and die steels – Specification | |
133. | IS 5517 : 1993 | Steel for hardening and tempering – Specification | |
134. | IS 7291 : 1981 | Specification for High speed tool steels | |
135. | IS 7494 : 1981 | Specification for Steel for valves for internal combustion engines | |
136. | IS 12146 : 1987 | Specification for Carbon manganese steel forgings for pressure vessels | |
137. | IS 16585 : 2016 | Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. | |
138. | IS 2831 : 2012 | Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification | |
139. | IS 1148: 2009 | Steel Rivet Bars (medium And High Tensile) – For Structural Purposes | |
140. | IS 1673: 1984 | Specification for Mild Steel Wire, Cold Heading Quality | |
141. | IS 1812: 1982 | Specification for Carbon Steel Wire for the Manufacture of Wood Screws | |
142. | IS 2507: 1975 | Specification for Cold – rolled Steel Strips For Springs. | |
143. | IS 2255: 1977 | Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). | |
144. | IS 3195: 1992 | Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification . | |
145. | IS 3431: 1982 | Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. | |
146. | IS 3885-Part-1: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification. | |
147. | IS 3885-Part- 2: 1992 | Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. | |
148. | IS 4223: 1975 | Specification for Steel Wire for Umbrella Ribs . | |
149. | IS 4224: 1972 | Specification for Steel Wire for Staples, Pins And Clips. | |
150. | IS 4397: 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. | |
151. | IS 4398: 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification | |
152. | IS 6902: 1973 | Specification for Steel Wire for spokes. | |
153. | IS 6967: 1973 | Specification for Steel For Electrically welded round Link Chains. | |
154. | IS 7226: 1974 | Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. | |
155. | IS 7557: 1982 | Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. | |
156. | IS 8052: 2006 | Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification. | |
157. | IS 8951: 2001 | Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification | |
158. | IS 8952: 1995 | Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification | |
159. | IS 9476: 1980 | Specification for Cold rolled steel strips for carbon steel razor blades. | |
160. | IS 9962: 1981 | Specification for Steel Wire for Needles. | |
161. | IS 12367:1988 | Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes. | |
162. | IS 14331:1995 | Steels for High Temperature Bolting Applications – Specification | |
163. | IS 14491:1997 | Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification | |
164. | IS 14650:1999 | Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification | |
165. | IS 4882: 1979 | Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry | |
166. | IS 2090:1983 | Specification for High Tensile Steel Bars used in Pre-stressed Concrete | |
167 | IS 6529:1996 | Stainless Steel Blooms Billets And Slabs For Forging | |
168 | IS 9294:1979 | Cold-Rolled Stainless Steel Strips for Razor Blades | |
169 | IS 10631:1983 | Stainless Steel for welding electrode core wire | |
171 | IS 10631 (Part 2):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire. | |
171 | IS 10631 (Part 3):1983 | Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates. | |
172 | IS 11169 (Part 2): 1989 | Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel | |
173 | IS 5651:1987 | Steels for Pneumatic Tools | |
174 | IS 9516:1980 | Heat Resisting Steels | |
175 | IS 11952:1986 | Steels For Piston Pins (Gudgeon Pins) | |
176 | IS 12045:1987 | Alloys Used in Electrical Resistance Metallic Heating Elements | |
177 | IS 14652:1999 | 18 Percent Nickel Maraging Steel Bars and Rods | |
178 | IS 1566:1982 | Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement | |
179 | IS 5489: 1975 | Carburizing Steels For Use in Bearing Industry. | |
180 | IS 11946:1987 | Soft Magnetic Iron Strips | |
181 | IS 11947:1987 | Soft Magnetic Iron Rods, Bars Flats and Sections | |
182 | IS 963: 1958 | Chrome molybdenum steel bars and rods for aircraft purposes | |
183 | IS 4454 (Part 4): 2001 | Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire | |
184. | IS 1993 : 2018 | Cold-reduced Electrolytic Tin Plate | |
185. | IS 12591:2018 | Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel | |
186. | IS 412:1975 | Expanded Metal Steel Sheets For General Purposes | |
187. | IS 2100: 1970 | Steel Billets,Bars And Sections For Boilers | |
188. | IS 2589: 1975 | Hard Drawn Steel Wire For Upholstery Springs | |
189. | IS 3298: 1981 | Mild Steel Rivet Bars For Ship Building | |
190. | IS 4072: 1975 | Steel For Spring Washers | |
191. | IS 8510 (Part II): 1977 | Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires | |
192. | IS 8510 (PartIII): 1977 | Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires | |
193. | IS 8563: 1977 | Half Round Mild Steel Wire For The Manufacture of Split Pins | |
194. | IS 8564: 1977 | Steel Wire For Nipples For Spokes | |
195. | IS 8565: 1977 | Heald Wire | |
196. | IS 8566: 1977 | Steel Wire For Reeds | |
197. | IS 8917: 1978 | Plates For Galvanizing Pots | |
198. | IS 9442: 1980 | Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs | |
199. | IS 9485: 1980 | Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling | |
200. | IS 10794: 1984 | Mild steel wire for cotter pins | |
201. | IS 12262:1988 | Trapezoidal Steel Wire For Springs Washers | |
202 | IS 12313: 1988 | Hot-Dip Terne Coated Carbon Steel Sheets | |
203 | IS 15911:2010 | Structural Steel (Ordinary Quality) | |
204 | IS 4430: 1979 | Mould Steels | |
205 | IS 4431: 1978 | Carbon And Carbon- Manganese Free- Cutting Steels | |
206 | IS 4432: 1988 | Case Hardening Steels | |
207 | IS 5518: 1996 | Steels For Die Blocks For Drop Forging | |
208 | IS 8748: 1978 | Forged/Rolled CTC Segments | |
209 | IS 12145: 1987 | Quenched And Tempered Alloy Steel Forgings For Pressure Vessels | |
210 | IS 13387: 1992 | Tool Steel Forgings For Metal Forming | |
211 | IS 14698:1999 | Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services | |
212 | IS/ISO 11951 : 2016 | Cold – Reduced tinmill products – Blackplate | |
213 | IS 3930: 1994 | Flame And Induction Hardening Steels | |
214 | IS 5478: 1969 | Thermostat Metal Sheet and Strip | |
215 | IS 13352: 1992 | Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs | |
216 | IS 16644: 2018 | Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete | |
217. | IS 8329 : 2000 | Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage | 13. Ductile Iron Pressure Pipes and Fittings (Quality Control) Order, 2009 S.O. No. 1544(E) dated 25-06-2009 The above order was rescinded by DIPP vide Gazette Notification No. 2681(E) dated 23 October 2009 and a fresh Notification No. 2749(E) dated 30-10-2009 was issued. |
218. | IS 9523:2000 | Ductile iron fittings for pressure pipes for water, gas and sewage | |
219. | IS 1161:2014 | Steel tubes for structural purposes | 14. Mild Steel Tubes (excluding seamless tube & tubes according to API Specification) (Quality Control) order,1978 and Amendment Order, 1983 |
220. | IS 1239 (Part 1):2014 | Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes | |
221. | IS 4270:2001 | Steel tubes used for water-wells (upto 200 mm dia) | |
222. | IS 9139:1979 | Specification for Malleable iron shots and grits for use in foundries | 15. Malleable Iron Shots and Grits (Quality Control) Order, 2020 |
Electrical Transformers | |||
223. | IS 1180 (Part 1) | Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed | |
Electrical Motors | |||
224. | IS 12615 | Energy Efficient Induction Motors-Three Phase Squirrel Cage | |
Capacitors | |||
225. | IS 2993 | A.C. motor capacitors | 18. SO 2434(E), dated 01st August 2017 Date of Implementation 01/02/2018 |
226. | IS 13340 | Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V | |
227. | IS 13585 Part 1 | Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation | |
Chemicals & Fertilizers | |||
228. | IS 252:2013 | Caustic Soda -Specification | 19. Bureau of Indian Standard (Caustic Soda) Order, 2018 |
229. | IS 10116 : 2015 | Boric Acid – Specification | 20. Bureau of Indian Standards (Standards for Boric Acid) Order, 2019 |
230. | IS 15573 | Poly Aluminium Chloride | 21. Poly Aluminium Chloride (Quality Control) Order, 2019 |
231. | IS 695 | Acetic Acid | 22. Acetic Acid (Quality Control) Order, 2019 (S.O. 2791 (E) dated 05/08/2019) Amendent in Acetic Acid (Quality Control) Order, 2019 (S.O.344 (E) dated 24th January 2020) Amendment in Acetic Acid (Quality Control) Order, 2019 |
232. | IS 2833 | Aniline | 23. Aniline (Quality Control) Order, 2019 (S.O. 2792 (E) dated 05/08/2019) Aniline (Quality Control) Order, 2019 (S.O.203 E) dated 15th January 2020) Amendment in the Aniline (Quality Control) Order, 2020 |
233. | IS 517 | Methanol | 24. Methanol (Quality Control) Order, 2019 (S.O. 2793 (E) dated 05/08/2019) Amendent in Methanol (Quality Control) Order, 2019 (S.O. 345(E)dated 24th January 2020) Amendment in the Methanol (Quality Control) Order, 2019 |
234. | IS 5158: 1987 | Specification for Phthalic Anhydride, Technical | 25. Phthalic Anhydride (Quality Control) Order, 2020. |
235. | IS 8058:2018 | Pyridine | 26. Pyridine (Quality Control) Order, 2020. (S.O.1890(E) dated 16 /06/2020) Amendment in the Pyridine (Quality Control) Order 2020 |
236. | IS 16113:2013 | Gamma Picoline | 27. Gamma Picoline (Quality Control) Order, 2020 (S.O.1891(E) dated 16 /06/2020) Amendment in the Gamma Picoline (Quality Control) Order 2020 |
237. | IS 16112:2013 | Beta Picoline | 28. Beta Picoline (Quality Control) Order, 2020 (S.O.1892(E) dated 16 /06/2020) Amendment in the Beta Picoline (Quality Control) Order 2020 |
238. | IS 12084: 2018 | Morpholine | 29. Morpholine (Quality Control) Order, 2020 |
239. | IS 297:2001 | Sodium Sulphide, Technical | 30. Sodium Sulphide (Quality Control) Order, 2020 |
240. | IS 7129:1992 | Potassium Carbonate, Anhydrous | 31. Potassium Carbonate (Quality Control) Order, 2020 (S.O.1895(E) dated 16 /06/2020) Amendment in the Potassium Carbonate (Quality Control) Order 2020 |
241. | IS 170:2004 | Acetone | 32. Acetone (Quality Control) Order, 2020 (S.O.1896(E) dated 16 /06/2020) |
242. | IS 4581:1978 | Phosphorous Trichloride, pure and Analytical Reagent | 33. Phosphorous Trichloride (Quality Control) Order, 2020 |
243. | IS 11744:1986 | Phosphorous Pentachloride, Technical | 34. Phosphorous Pentachloride, (Quality Control) Order, 2020 |
244. | IS 11657:1986 | Phosphorous Oxychloride, Technical | 35. Phosphorous Oxychloride, (Quality Control) Order, 2020 |
245. | IS 2080:1980 | Stabilized Hydrogen Peroxide | 36. Hydrogen Peroxide, (Quality Control) Order, 2020 (S.O.1900(E) dated 16 /06/2020) Amendment in the Hydrogen Peroxide (Quality Control) Order 2020 |
246. | IS 3205:1984 | Precipitated Barium Carbonate, Technical | 37. Precipitated Barium Carbonate, (Quality Control) Order, 2020 |
247. | IS 12928:1990 | Precipitated Barium for Ceramic and Glass Industry | Precipitated Barium Carbonate, (Quality Control) Order, 2020 |
248. | IS 4505:2015 | Sodium Formaldehyde Sulphoxylate | 38. Sodium Formaldehyde Sulphoxylate, (Quality Control) Order, 2020 |
249. | IS 6100:1984 | Sodium Tripolyphosphate, Anhydrous, Technical | 39. Sodium Tripolyphosphate, (Quality Control) Order, 2020 (S.O.1903(E) dated 16 /06/2020) Amendment in the Sodium Tripolyphosphate (Quality Control) Order 2020 |
250. | IS 14709:1999 | n- Butyl Acrylate | 40. n-Butyl Acrylate (Quality Control) Order, 2020 |
251. | IS 336:1973 | Ether | 41. Ether (Quality Control) Order, 2020 |
252. | IS 5295:1985 | Ethylene Glycol | 42. Ethylene Glycol (Quality Control) Order, 2020 |
253. | IS 537:2011 | Toluene | 43. Toluene (Quality Control) Order, 2020 |
254. | IS 15030:2001 | Terephthalic Acid | 44. Terephthalic Acid (Quality Control) Order, 2020 |
255. | IS 14707: 1999 | Methyl Acrylate | 45. Methyl Acrylate, Ethyl Acrylate, n-Butyl Acrylate (Quality Control) Order, 2020 |
256. | IS 14708:1999 | Ethyl Acrylate | |
257. | IS 12345:1988 | Vinyl Acetate Monomer | 46. Vinyl Acetate Monomer (Quality Control) Order, 2020 |
258. | IS 4105:2020 | Styrene (Vinyl Benzene) | 47. Styrene (Vinyl Benzene) (Quality Control) Order, 2020 |
259. | IS 5149:2020 | Maleic Anhydride, Technical | 48. Maleic Anhydride (Quality Control) Order, 2020 |
260. | IS 12540:1988 | Acrylonitrile | 49. Acrylonitrile (Quality Control) Order, 2020 |
Kitchen Appliances | |||
261. | IS 302 (Part 2/ Section 14) | Hand-held Blender | 50. Bureau of Indian Standards Kitchen Appliances (Quality Control) Order, 2018 |
262. | IS 4250 | Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer | |
Domestic Water Heaters for use with LPG | |||
263. | IS 15558 | Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas | 51. Bureau of Indian Standards Domestic Water Heater for Use with Liquefied Petroleum Gas (Quality Control) Order, 2018 |
Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls | |||
264. | IS 1391 (Part-1): 2017 | Room Air Conditioners- Specification Part 1 Unitary Air Conditioners | 52. Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Order, 2019 The Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2020. The Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) |
265. | IS 1391 (Part-2): 2018 | Room Air Conditioners- Specification Part 2 Split Air Conditioners | |
266. | IS 8148:2018 | Ducted and Package Air Conditioners | |
267. | IS 11329:2018 | Finned type Heat Exchanger for Room Air Conditioner | |
268. | IS 10617:2018 | Hermetic compressor | |
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy | |||
269. | IS 1293 : 2005 | Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes | 53. Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Order, 2019 The Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Amendment Order, 2020 |
270. | IS 15884:2010 | Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) | |
Domestic Gas Stoves for use with Liquefied Petroleum Gases | |||
271. | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases | 54. Domestic Gas Stoves for use with Liquefied Petroleum Gases (Quality Control) Order, 2019 |
Transparent Float Glass | |||
272. | IS 14900: 2018 | Transparent Float Glass | 55. Transparent Float Glass (Quality Control) Order, 2019 Transparent Float Glass (Quality Control) (Amendment) Order, 2020 |
Domestic Pressure Cooker | |||
273. | IS 2347:2017 | Domestic Pressure Cooker | 56. (Quality Control) Order, 2020 Domestic Pressure Cooker (Quality Control) (Amendment) Order, 2020 |
Cables | |||
274. | IS 1554(Part 1) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V | 57. Cables (Quality Control) Order, 2020 |
275. | IS 1554(Part 2) : 1988 | Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV | |
276. | IS 7098 (Part 1) : 1988 | Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V | |
277. | IS 7098 (Part 2) : 2011 | Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV | |
280. | IS 7098 (Part 3) : 1993 | Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV | |
279. | IS 14255 : 1995 | Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification | |
280. | IS 9968 (Part 2) : 2002 | Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV | |
281. | IS 8784 : 1987 | Specification for Thermocouple Compensating Cables | |
282. | IS 9857 : 1990 | Welding Cables – Specification | |
283. | IS 14494 : 2019 | Elastomer Insulated Flexible Cables for Use in Mines – Specification | |
284 | IS 2593 : 1984 | Specification for Flexible Cables for Miner’s Cap-Lamps | |
285. | IS 5950 : 1984 | Specification for Shot Firing Cables (for use other than in shafts) | |
286. | IS 17048 : 2018 | Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification | |
Rubber Hose for Liquefied Petroleum Gas (LPG) | |||
287. | IS 9573(Part 1):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application | 58. Rubber Hose for Liquefied Petroleum Gas (LPG) (Quality Control ) Order, 2020 |
288. | IS 9573(Part 2):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application. | |
Aluminium Foil | |||
289. | IS 15392 | Aluminium and Aluminium Alloy Bare Foil for Food Packaging | 59. Aluminium Foil (Quality Control) Order, 2020 |
Toys | |||
290. | IS 9873 (Part 1) : 2018 | Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties. | 60. Toys (Quality Control ) Order, 2020 Toys (Quality Control) Second Amendment Order 2020 |
IS 9873 (Part 2) : 2017 | Safety of Toys Part 2 Flammability. | ||
IS 9873 (Part 3) : 2017 | Safety Requirements for Toys Part 3 Migration of Certain Elements. | ||
IS 9873 (Part 4) : 2017 | Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use. | ||
IS 9873 (Part 7) : 2017 | Safety of Toys Part 7 Requirements and Test Methods for Finger Paints. | ||
IS 9873 (Part 9) : 2017 | Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products. | ||
IS 15644: 2006 | Safety of Electric Toys. | ||
Flat Transparent Sheet Glass | |||
291. | IS 2835 : 1987 | Flat Transparent Sheet Glass. | 61. Flat Transparent Sheet Glass (Quality Control ) Order, 2020 Flat transparent Sheet Glass (Quality Control) (Amendment) Order, 2020 |
Safety Glass | |||
292. | IS 2553 (Part 1):2018 | Safety Glass -Specification Part 1 Architectural, Building and General uses. | 62. Safety Glass (Quality Control ) Order, 2020 Safety Glass (Quality Control) Amendment Order, 2020 |
293. | IS 2553 (Part 2):2019 | Safety Glass -Specification Part 2 For Road Transport . | |
Woven Sacks | |||
294. | IS 14887:2014 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains | 63. The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020 |
295. | IS 16208:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains | |
296. | IS 14968:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar | |
297. | IS 14252:2015 | Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand | |
Butterfly Valves | |||
298. | IS 13095:1991 | Butterfly valves for general purpose | 64. Butterfly valves (Quality Control) Order, 2020. |
Reflectors for Bicycles | |||
299. | IS/ISO 6742 (Part 2):2015 | Retro-reflective Devices | 65. Bicycles- Retro Reflective Devices (Quality Control) Order, 2020 . |
Paper | |||
300. | IS 14490:2018 | Plain Copier Paper | 66. Plain Copier Paper (Quality Control) Order, 2020. |
Cattle Feeds | |||
301. | IS 2052 : 2009 | Compounded Feeds for Cattle | 67. FSSAI Direction vide File No. 1-95/Std/Misc/SP(LC&A)/FSSAI-2015-Pt-1c dated 27.01.2020 |
Automobile Wheel Rim Component | |||
302. | IS: 16192 (Part 1) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 | 68. Automobile Wheel Rim Component (Quality Control) Order, 2020 |
303. | IS: 16192 (Part 2) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 | |
304. | IS: 16192 (Part 3) | Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 | |
305. | IS: 9436 | Performance Requirements and Methods of Tests for Wheels for Passenger Cars | |
306. | IS: 9438 | Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses | |
Foot Wear | |||
307. | IS 5557: 2004 | Industrial and protective rubber knee and ankle boots | 69. Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020 (S.O. No. 3858 (E) 27/10/2020) Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Amendment Order, 2020 |
308. | IS 5557 (Part 2): 2018 | All rubber gum boots and ankle boots | |
309. | IS 5676: 1995 | Moulded solid rubber soles and heels | |
310. | IS 6664: 1992 | Rubber microcellular sheets for soles and heels | |
311. | IS 6719: 1972 | Solid PVC soles and heels | |
312. | IS 6721: 1972 | PVC sandal | |
313. | IS 10702: 1992 | Rubber Hawai Chappal | |
314. | IS 11544: 1986 | Slipper, rubber | |
315. | IS 12254: 1993 | Polyvinyl chloride(PVC) industrial boots | |
316. | IS 13893: 1994 | Polyurethane sole, semirigid | |
317. | IS 13995: 1995 | Unlined moulded rubber boots | |
318. | IS 16645: 2018 | Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use | |
319. | IS 16994: 2018 | Footwear for men and women for municipal scavenging work | |
320. | IS 1989 (Part 1): 1986 | Leather safety boots and shoes for miners | 70. Footwear made from Leather and other materials (Quality Control) Order, 2020 (S.O. No. 3860(E) dated 27/10/2020) Footwear made from Leather and other materials (Quality Control) Amendment Order 2020 |
321. | IS 1989 (Part.2): 1986 | Leather safety boots and shoes for heavy metal industries | |
322. | IS 3735: 1996 | Canvas Shoes Rubber Sole | |
323. | IS 3736: 1995 | Canvas Boots Rubber Sole | |
324. | IS 3976: 2018 | Safety Rubber Canvas Boots for Miners | |
325. | IS 11226: 1993 | Leather safety footwear having direct moulded rubber sole | |
326. | IS 14544: 1998 | Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole | |
327. | IS 15844: 2010 | Sports footwear | |
328. | IS 17012: 2018 | High ankle tactical boots with PU – Rubber sole | |
329. | IS 17037: 2018 | Antiriot shoes | |
330. | IS 17043: 2018 | Derby shoes | |
331. | IS 15298 (Part 2): 2016 | Personal protective equipment – Part 2 Safety Footwear | 71. Personal Protective Equipment – Footwear (Quality Control) Order, 2020 (S.O. No. 3857(E) dated 27/10/2020) Personal Protective Equipment – Footwear (Quality Control) Amendment Order, 2020 |
332. | IS 15298 ( Part 3) : 2019 | Personal protective equipment – Part 3 Protective Footwear | |
333. | IS 15298 (Part 4) : 2017 | Personal protective equipment – Part 4 Occupational Footwear | |
Press Tool-Punches | |||
334. | IS 4296 (Part 1):2016 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank | 72. Press Tool- Punches (Quality Control) Order, 2020 |
335. | IS 4296 (Part 2):2016 | Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank | |
336. | IS 4296 (Part 3):2016 | Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank | |
Helmet for riders of Two Wheeler Motor Vehicles | |||
337. | IS 4151: 2015 | Helmet for riders of Two Wheeler Motor Vehicles | 73. Helmet for riders of Two Wheeler Motor Vehicles (Quality Control) Order, 2020 |
Refrigerating Appliances | |||
338. | IS 1476 (Part1): 2000 | Household refrigerating appliance-Refrigerators with or without low temperature : Part 1 energy consumption and performance | 74. Refrigerating Appliances (Quality Control) Order, 2020 |
339. | IS 7872: 2018 | Freezers | |
340. | IS 15750:2006 | Household frost – Free refrigerating appliances – Refrigerators cooled by internal forced air circulation – Characteristics and test methods | |